2.0 oxidation emulsion 2% SBTS

The hydrogen index (pH) of the finished dye mixture is neutral, so the dyeing procedure does not damage the hair or dry out the skin.

USE:

STAGES OF EYEBROW TINTING

1) Preparation for the staining procedure

Use ELAN DETOX-MOUSSE For degreasing the hair and skin before coloring or eyebrow shaping procedures. Remove the foam with a cotton swab moistened with water.

2) Shaping the eyebrows

Give your eyebrows the right shape.

3) Preparation of the coloring mixture

Mix "Deep Brow Tint 2.0" eyebrow paint with 2% oxidizing emulsion in a 1:1 ratio in a non-metallic container. If you need to deepen and intensify the colors of the main palette or create a new shade, use the corresponding "Eybrow Tint Color Booster 2.0" according to the mixing ratio below:

Eyebrow dye (49%) + oxidizing emulsion (49%) + enhancing concentrate (2%) = coloring mix (100%)

NOTE! The color of the shade in the bottle/tube may vary from light brown to black due to exposure of the product to oxygen after opening the package. This difference is normal for the dyes used and does not affect the result of eyebrow coloring or the consistency of that result when using the same coloring mixture repeatedly.

NOTE! The more booster concentrate used, the closer the final shade will be to the color of the booster (blue or orange).

4) Eyebrow tinting

Apply the coloring mixture to your eyebrows according to the desired shape. Depending on the desired result, leave the tint on for 5-10 minutes. After the specified time, remove excess tint with a cotton swab moistened with water. If the tint has gone beyond the desired shape, remove the excess with a cotton swab moistened with ELAN SKIN COLOR REMOVER.

5) Completion of the eyebrow coloring procedure

To fix the achieved effect, apply to the eyebrows ELAN COLOR FIX.

PRECAUTIONS

The oxidizing emulsion contains hydrogen peroxide. The eyebrow dye and enhancer concentrate contains p-phenylenediamine, p-phenylenediamine (toluenediamine) and resorcin.

48 hours before use, perform an allergy test: mix 2 drops of dye with an oxidizing emulsion and apply the mixture to the skin surface at the elbow bend. If there is no redness, swelling or irritation on the skin, you can proceed with coloring.

For professional use only. Paints can cause severe allergic reactions. Read carefully and follow instructions. This product is not intended for use by persons under 16 years of age. Temporary black henna tattoos may increase the risk of allergies.

Don't use paint if you have it:

- A rash on the face or a sensitive, irritated or damaged scalp;

- experienced any reaction after hair coloring;

- had a reaction to temporary black henna tattoos in the past.

Use protective gloves. Avoid using metal objects when working with the product. Do not apply to eyelashes. For external use only. Avoid contact with eyes. If product gets into eyes, rinse immediately with water. Rinse thoroughly after application. Be sure to consult a dermatologist if an allergic reaction occurs.

---

Chemical composition

AQUA, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, GLYCERIN, CETEARETH-20, PARAFFINUM LIQUIDUM, ETHYLHEXYL STEARATE, ARGANIA SPINOSA KERNEL OIL, CETRIMONIUM CHLORIDE, HYDROLYZED COLLAGEN, TETRASODIUM PYROPHOSPHATE, DISODIUM EDTA, SODIUM STANNATE, CITRIC ACID, PHOSPHORIC ACID, SODIUM CARBONATE, SODIUM HYDROXIDE

Manufactured in Turkey