Oxidation emulsion 3.5%

STAGES OF EYEBROW TINTING

1) Preparation for the coloring procedure

Use ÉLAN DETOX-MOUSSE to degrease the hair and skin prior to the eyebrow coloring or shaping procedure. Remove any residue with a cotton ball moistened with water.

2) Eyebrow shaping

Shape your eyebrows with any convenient product.

3) Preparation of the coloring mixture

Mix the proprietary "SBTS" eyebrow coloring system or ÉLAN gel eyebrow dye with 3.5% oxidizing emulsion in a 1:1 ratio in a non-metallic container.

If you want to further deepen and saturate the colors from the main palette of the "SBTS" eyebrow coloring system or create a new shade, use the corresponding "Eyebrow Tint Color Booster 2.0" according to the mixing ratios below:

eyebrow dye (49%) + oxidizing emulsion (49%) + enhancing booster (2%) = dye blend (100%)

4) Eyebrow tinting

Apply the coloring mixture to the eyebrows according to the desired shape. Depending on the desired result, leave the proprietary eyebrow coloring system "SBTS" for 5-10 minutes and the ÉLAN eyebrow coloring gel for 5-15 minutes. After the specified time, wash off the remaining coloring mixture with a cotton swab moistened with water. If the coloring mixture goes beyond the expected shape, we recommend removing the excess with a cotton swab moistened with ÉLAN REMOVER.

5) Completion of the eyebrow coloring procedure

To fix the effect, apply ÉLAN COLOUR FIX to the eyebrows.

PRECAUTIONS

Eyebrow dye and booster contain phenylenediamine, phenylenediamine (toluene diamine), resorcinol.

48 hours before use, perform an allergy test: mix 2 drops of dye and oxidizing emulsion and apply this mixture to a small area of skin in the elbow bend. If no redness, swelling or irritation appears on the skin, proceed with dyeing.

For professional use only. Hair dyes can cause serious allergic reactions. Be sure to read and follow the instruction manual. The product is not intended for use by persons under 16 years of age. Temporary tattooing with black henna may increase the risk of allergies.

Do not use the dye if:

- You have a rash on your face or a sensitive, irritated or damaged scalp;

- experienced any reaction after hair coloring

- had a reaction to a temporary black henna tattoo in the past.

Wear protective gloves. Do not use metal objects when working with the product. Do not use to color eyelashes. For external use only. Avoid contact with eyes. In case of contact with eyes, rinse immediately with water. Rinse thoroughly after application. Consult a dermatologist if an allergic reaction occurs.

STAGES OF EYEBROW LIGHTENING

Mix the 3.5% TM ÉLAN professional line oxidizing emulsion with carbon or ultramarine powder to lighten eyebrows in a 2:1 ratio (two parts oxidizing emulsion and one part powder).

First, apply the whitening mixture to the thicker hairs, then use the brush to spread it all over the eyebrows.

Depending on the desired result and thickness of the hairs, leave the mixture on the eyebrows for 3-15 minutes.

Once the desired result is achieved, remove the whitening mixture with a cotton swab moistened with water.

If you want an even lighter shade, repeat the procedure.

To complete the chemical reaction, apply ÉLAN DETOX-MOUSSE to the eyebrows and remove the foam with a damp cotton swab.

To fix the effect, apply "COLOUR FIX" fixative liquid to the eyebrow hairs, which contains keratin and sunflower oil.

Tone or darken eyebrows as needed.

Important: after bleaching the eyebrow hairs, it is not recommended to perform the standard eyebrow tinting procedure. If you use eyebrow dye and oxidant in a 1:1 ratio, the eyebrow hairs will turn black.

Storage conditions: store in a dry place, out of the reach of children, at a temperature of +5°C to +25°C. Avoid direct sunlight.

CHEMICAL COMPOSITION:

AQUA, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, GLYCERIN, CETEARETH-20, PARAFFINUM LIQUIDUM, ETHYLHEXYL STEARATE, ARGANIA SPINOSA KERNEL OIL, CETRIMONIUM CHLORIDE, CITRIC ACID, PHOSPHORIC ACID, TETRASODIUM PYROPHOSPHATE, DISODIUM EDTA, SODIUM STANNATE, SODIUM CARBONATE, SODIUM HYDROXIDE.