Serum 2 15 ml SUPERSONIC MAX Eyebrow and Eyelash Flexing Expert System

• Restores disulfide bonds, gives hair elasticity and resilience;
• fixes the shape;
• Restores natural pH;
• Closes the scales of the epidermis;
• Neutralizes excess alkalizer;
• contains a complex of care ingredients based on cationic agents and emollients,
  as well as argan oil and hydrolyzed collagen, which condition and moisturize hair,
  Protecting them and adding shine.

The hydrogen index (pH) is 2.5-3.0. The serum does not contain sodium bromate.

The hydrogen peroxide content of the product does not exceed 2%.

For professional use only!

Use only with Cera Healer Serum 1 i Serum 3!

---

Application mode:

After using Serum 1, apply Serum 2 to eyebrows or eyelashes.

Exposure time: 6-10 minutes, depending on the condition of the eyebrow hairs or eyelashes (see application instructions). Remove product residue with a cotton swab soaked in water.

NOTE! Before treatment, perform a sensitization test: apply 2 drops of each product to a small area of elbow crease skin 48 hours before use. You can start the flexing treatment if no redness, swelling or irritation appears on the skin.

Then remove excess product with a cotton swab soaked in water.

---

 

STEPS IN THE EYEBROW FLEXING PROCEDURE

1) Analyze the condition of the client's eyebrow hairs

Determine the duration of the eyebrow flexing product according to the instructions below:

Type I: eyebrow hairs are thick, not previously chemically treated (eyebrow coloring or bleaching) - treatment time is 5-8 minutes for Serum 1 and no less than 6-8 minutes for Serum 2;

II type: hair is medium thickness, natural, healthy or after previous chemical treatments (eyebrow coloring or bleaching) - application time 3-5 minutes for Serum 1 and 6-8 minutes for Serum 2;

The duration of the 3 Cera Healer Serum is 5 minutes for all hair types.

NOTE! The maximum processing time for Serum 1 and Serum 2 is 15 minutes.
NOTE! The effect of Serum 1 and Serum 2 depends directly on the air temperature in the room.
The higher the temperature, the shorter the response time.

2. prepare eyebrows for lamination treatment

Use "ÉLAN professional line Purifying mousse-detox for eyebrows and eyelashes with antibacterial action" to cleanse hair and skin before eyebrow lamination treatment. Remove the mousse with a cotton ball moistened with water.

3. create an eyebrow shape (Serum 1)

NOTE! If the client has thin and sensitive skin, it is necessary to apply a thin layer of ELAN professional line brand argan oil cream on the eyebrows and a thicker layer on the skin around the eyebrows.

Apply Serum 1 to the eyebrows.

NOTE! The maximum time should not exceed the time for the selected type of eyebrow hair.

When the time is up, remove excess product with a cotton swab soaked in water.

NOTE! When creating the shape of the eyebrows, the direction of hair growth should be taken into account. Changes in the shape of the eyebrows should be smooth to avoid kinking of the hairs.

4. determine the direction of the eyebrow hairs (Serum 2)

NOTE! If the client has thin and sensitive skin, it is necessary to apply a thin layer of argan oil cream from ELAN professional line on the eyebrows and a thicker layer on the skin around the eyebrows.

Apply and spread Serum 2 on the eyebrows, positioning the hairs in the right direction.

NOTE! The amount of product used in the fourth stage of eyebrow flexing treatment (Serum 2) should be equal to the amount of product used in the third stage of eyebrow shaping (Serum 1).

NOTE! The treatment time for stage IV (Serum 2) should be equal to the treatment time for stage III of eyebrow shaping (Serum 1), but not less than 6 minutes.

After the application time has elapsed, remove excess product with a cotton swab soaked in water if you plan to color your eyebrows.

After treatment, remove excess product with a cotton swab soaked in "ÉLAN professional line Cleansing detox-antibacterial eyebrow and eyelash foam" to stop the chemical reaction if eyebrow coloring is not planned. Remove the foam with a cotton swab moistened with water.

5. eyebrow hair care (Serum 3 Cera Healer)

• Apply and spread the 3 Cera Healer Serum on the eyebrows.
• After the application time, remove excess product with a cotton swab soaked in water, if you do not plan to color your eyebrows.
• After the treatment, remove excess product with a cotton swab soaked in "ÉLAN professional line Purifying Detoxifying Foam for Eyebrows and Eyelashes with Antibacterial Action" to stop the chemical reaction, if eyebrow coloring is planned.
• Remove the foam with a cotton swab moistened with water.
• Apply the coloring mixture to the eyebrows immediately after using "ÉLAN professional line Purifying detox-antibacterial eyebrow and eyelash foam".

NOTE! It should be taken into account that the color may appear faster on the hair during the coloring procedure.

For better results, use "ÉLAN professional line COLOR FIX: color fixing fluid for eyebrows and eyelashes with keratin and sunflower seed oil." Also perform this step after completing the eyebrow tinting procedure.

NOTE! Eyebrow adjustment should be performed only after the eyebrow lamination procedure is completed. The use of eyebrow tweezers is strongly recommended to avoid serious skin damage.

---

 

STAGES OF EYELASH FLEXING PROCEDURE

1) Analyze the condition of the client's eyelashes

Determine the duration of the eyelash products according to the instructions below:

Type I: eyelashes are thick or straight - serum application time is 6-10 minutes
1 and no less than 6 minutes for Serum 2;

II type: eyelashes are medium thickness or thin - application time 3-6
minutes for Serum 1 and no less than 6 minutes for Serum 2;
The duration of the 3 Cera Healer Serum is 5 minutes for all hair types.

NOTE! The maximum application time for Serum 1 and Serum 2 is 15 minutes.

NOTE! The effect of Serum 1 and Serum 2 depends directly on the air temperature in the room.
The higher the temperature, the shorter the response time.

2) Prepare eyelashes for flexing treatment

• Use "ÉLAN professional line Purifying mousse-detox for eyebrows and eyelashes with antibacterial action" to cleanse hair and skin before eyelash lamination treatment. Remove the mousse with a cotton ball moistened with water.
• Apply a roller of the appropriate size to the upper eyelid.
• Spread and fix lashes on the roller with ÉLAN professional line fixing gel and applicator.
• Create an eyelash curl (Serum 1)
• Apply Serum 1 to the eyelashes.

NOTE! The maximum application time should not exceed the time for the selected type of eyelashes.

• At the end of the application time, remove excess product according to the direction of hair growth.

4) Determine the direction of the eyelash hairs (Serum 2)

• Apply a thick layer of Serum 2 to the entire surface of the lashes.

NOTE! The amount of preparation used in the fourth stage of eyelash thickening treatment
(Serum 2) should be equal to the amount of product used in the third stage of creating a curl (Serum 1).

NOTE! The treatment time for stage IV (Serum 2) should be equal to the treatment time for stage III of creating a curl (Serum 1), but not less than 6 minutes.

• At the end of the application time, remove excess product according to the direction of hair growth.

5) Eyelash care (Serum 3 Cera Healer).

• Apply Serum 3 Cera Healer to the entire eyelash area for 5 minutes.
• At the end of the application time, remove excess product with a cotton swab soaked in water.

NOTE! For the most impressive and visible effect, ELAN professional line technologists recommend performing an eyelash coloring treatment with tint 01 black ÉLAN professional line gel after the lamination treatment.

• Apply "ÉLAN professional line Purifying Detoxifying Mousse for Eyebrows and Eyelashes with Antibacterial Action" to stop the chemical reaction.
• Remove the foam with a cotton swab moistened with water. Also perform this step after completing the eyelash coloring treatment.
• For better results, use "ÉLAN professional line COLOR FIX: color fixing fluid for eyebrows and eyelashes with keratin and sunflower seed oil."

---

RECOMMENDATION AFTER EYEBROW AND EYELASH TREATMENT

! Tinting eyebrows with henna and bleaching eyebrows is not recommended, as the effect can be very unpredictable: hair structure can be damaged (hair is dry and dull), which can cause breakage and hair loss.

! It is recommended to avoid saunas, tanning beds and any mechanical damage to the resulting eyebrow shape or flexing of the eyebrows (sleeping face down into a pillow), limiting the contact of eyebrows and eyelashes with water and not combing eyebrows and eyelashes for 24 hours after the flexing procedure.

! It is recommended to avoid the use of aggressive cosmetic products and aggressive cosmetic treatments ( facial scrubs, alcohol-based lotions, laser treatments) for 48 hours after eyebrow or eyelash lamination treatment.

---

 

Chemical composition

AQUA, CETYL ALCOHOL, GLYCERIN, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, PARAFFINUM LIQUIDUM, CERATONIA SILIQUA (CAROB) SEED EXTRACT, HYDROLYZED SOY PROTEIN, HYDROLYZED COLLAGEN, POLYQUATERNIUM-7, POLYQUATERNIUM-16, ZEA MAYS (CORN) STARCH, ARGANIA SPINOSA KERNEL OIL, CETEARETH-33, TETRASODIUM EDTA, PHOSPHORIC ACID, SODIUM BENZOATE, BENZOIC ACID, PHENOXYETHANOL, POTASSIUM SORBATE.

Manufactured in Spain